4

> Temperature control cup holder sleeve with rechargeable battery requiring limited charging.

> Designed for 25 cycles keeping coffee / tea warm at 160F for 45 minutes each serving.

Designed for 120z to 16oz cups which are used by 95th percentile.Cup Sleeve

  • 14oz and 16oz coffee or hot beverage cup with integrated wireless heating.
  • Maintain temperature between 145F (63oC) to 155F (68oC) for 45 minutes after pouring.
  • Assume starting temperature at 180F +/- 5F (80C – 85C).
  • Cup bottom temperature to reach 100C within 5 minutes of ON.
  • Nano heater designed for dynamic heating.
  • Cup interior dimensions should be 85 mm ; external height < 130 mm with rounded lip.
  • Snap fit insulated lid with sipping port.
  • Double lined with 1.5 mm inner and outer lining and 1.5 mm air gap for insulation.
  • Plastic of the cup is food grade PC.
  • Metal lining is food grade stainless steel – height 40 mm only.
  • ON / OFF switch with lighted blue ring at base when ON.
  • 30 minute timer to turn OFF Nano Heater to eliminate battery drain.
  • RED flashing indicator when battery level below 25% of full power.
  • Nano heater will be OFF when battery is being charged.
  • Indicator to stay RED during charging and change to blue once fully charged.
  • Battery indicator only lit when cup turned on.
  • Weight < 400 grams.
  • UL Certified with 3500 to 5000 mAh rechargeable battery.
  • Sealed rechargeable battery pack for powering  7 cup servings before recharging.
  • Wireless and portable.
  • Cup designed to keep liquid warm uniformly from top to bottom.
  • Cup with USB charging cable or wireless charging.

Rechargeable in car cup warmer

2

1

Drink temperature comparison – with & without cup warmer

 

3

Tagged with →  
Share →

Leave a Reply

Your email address will not be published. Required fields are marked *